Rely On AZ-500 Dumps: Use the Right Exam Preparation Materials To Pass The AZ-500 Exam

AZ-500 Exam Preparation Materials

I did a lot of research to prepare for the Microsoft AZ-500 exam quickly and found out that relying on AZ-500 dumps and using the right exam preparation materials to pass the Microsoft Azure Security Technologies exam is amazing.

I understand that you want to quickly prepare and pass your Microsoft Azure AZ-500 certification to advance your career and showcase your expertise. Allow me to offer you the best option:

You can consider downloading the new AZ-500 dumps https://www.pass4itsure.com/az-500.html (PDF, VCE. Advanced Plan) and preparing for the exam with confidence.

Among other things, prepare for the Microsoft Certified: Azure Security Engineer Associate exam

Of course, there are other ways to pass the AZ-500 exam. Like what:

  • Research topics using official documentation
  • Watch the AZ-500 exam video instruction
  • Participate in community group discussions
  • Check out the relevant books
  • Attend instructor training

These are all means of passing the exam, and they are all correct. However, none of them relied on the AZ-500 dumps and used the right exam prep materials to prepare for the exam quickly. You can use these as an adjunct in combination with AZ-500 dumps to prepare for the Microsoft AZ-500 exam. This would be a better approach.

Alternatively, you can also try the AZ-500 free practice questions.

Free AZ-500 exam questions 1-15 from the latest AZ-500 dumps

From: Pass4itSure
Several questions: 15/491
Related certifications: Microsoft

Question 1:

HOTSPOT

You have an Azure subscription that contains a user named User1 and a storage account named Storage 1. The storage1 account contains the resources shown in the following table:

AZ-500 exam questions 1

User1 is assigned the following roles for storage1:

1.Storage Blob Data Reader

2.Storage Table Data Contributor

3.Storage File Data SMB Share Reader

Hot Area:

AZ-500 exam questions 1-2

Correct Answer:

AZ-500 exam questions 1-3

Question 2:

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while

others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have an Azure Subscription named Sub1.

You have an Azure Storage account named Sa1 in a resource group named RG1.

Users and applications access the blob service and the file service in Sa1 by using several shared access signatures (SASs) and stored access policies.

You discover that unauthorized users accessed both the file service and the blob service.

You need to revoke all access to Sa1.

Solution: You regenerate the access keys.

Does this meet the goal?

A. Yes

B. No

Correct Answer: A

To revoke a stored access policy, you can either delete it or rename it by changing the signed identifier. Changing the signed identifier breaks the associations between any existing signatures and the stored access policy. Deleting or

renaming the stored access policy immediately affects all of the shared access signatures associated with it.

References:

https://docs.microsoft.com/en-us/rest/api/storageservices/Establishing-a-Stored-Access-Policy

Question 3:

SIMULATION

You need to configure a weekly backup of an Azure SQL database named Homepage. The backup must be retained for eight weeks.

To complete this task, sign in to the Azure portal.

A. See the explanation below.

Correct Answer: A

You need to configure the backup policy for the Azure SQL database.

1. In the Azure portal, type Azure SQL Database in the search box, select Azure SQL Database from the search results then select Homepage. Alternatively, browse to Azure SQL Database in the left navigation pane.

2. Select the server hosting the Homepage database and click on Manage backups.

3. Click on Configure policies.

4. Ensure that the Weekly Backups option is ticked.

5. Configure the How long would you like weekly backups to be retained option to 8 weeks.

6. Click Apply to save the changes.

Question 4:

DRAG DROP

You have an Azure Sentinel workspace that has an Azure Active Directory (Azure AD) data connector.

You are threat-hunting suspicious traffic from a specific IP address.

You need to annotate an intermediate event stored in the workspace and be able to reference the IP address when navigating through the investigation graph.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Select and Place:

AZ-500 exam questions 4

Correct Answer:

AZ-500 exam questions 4-2

Question 5:

You need to consider the underlined segment to establish whether it is accurate.

You have been tasked with creating a different subscription for each of your company\’s divisions. However, the subscriptions will be linked to a single Azure Active Directory (Azure AD) tenant.

You want to make sure that each subscription has identical role assignments.

You make use of Azure AD Privileged Identity Management (PIM).

Select “No adjustment required” if the underlined segment is accurate. If the underlined segment is inaccurate, select the accurate option.

A. No adjustment is required

B. Azure Blueprints

C. Conditional access policies

D. Azure DevOps

Correct Answer: B

Azure AD PIM is a service that provides time-based and approval-based role activation to mitigate the risks of excessive, unnecessary, or misused access permissions to resources. While PIM is incredibly useful for managing and securing privileged access within Azure environments, it’s not directly designed to ensure identical role assignments across multiple subscriptions. PIM focuses more on the management of privileged roles and just-in-time privileged access.

However, the scenario is focused on ensuring that each subscription has identical role assignments, which is more aligned with the functionality of Azure Blueprints. Azure Blueprints allows the creation of a repeatable set of Azure resources that includes role assignments. This makes it possible to apply the same configuration, including role assignments, across multiple subscriptions, ensuring consistency.

Given the context and the need to correct the statement based on the task described, the accurate option should be:

B. Azure Blueprints

This choice reflects the need for consistent role assignments across multiple Azure subscriptions, which is what Azure Blueprints can help achieve. Azure Blueprints is designed for this kind of task, ensuring consistency in governance and configuration across multiple Azure subscriptions.

Reference: https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-how-to-add-role-to-user

Question 6:

SIMULATION

You need to configure a virtual network named VNET2 to meet the following requirements:

1. Administrators must be prevented from deleting VNET2 accidentally.

2. Administrators must be able to add subnets to VNET2 regularly.

To complete this task, sign in to the Azure portal and modify the Azure resources.

A. See the explanation below.

Correct Answer: A

Locking prevents other users in your organization from accidentally deleting or modifying critical resources, such as Azure subscriptions, resource groups, or resources.

Note: In Azure, the term resource refers to an entity managed by Azure. For example, virtual machines, virtual networks, and storage accounts are all referred to as Azure resources.

1. In the Azure portal, type Virtual Networks in the search box, select Virtual Networks from the search results then select VNET2. Alternatively, browse to Virtual Networks in the left navigation pane.

2. In the Settings blade for virtual network VNET2, select Locks.

AZ-500 exam questions 6

To add a lock, select Add.

AZ-500 exam questions 6-2

4. For Lock type select Delete lock, and click OK

Reference: https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-lock-resources

Question 7:

You have an Azure subscription that is linked to an Azure AD tenant and contains the resources shown in the following table.

AZ-500 exam questions 7

Which resources can be assigned the Contributor role for VM1?

A. Managed1 and App1 only

B. Group1 and Managed1 only

C. Group1, Managed1, and VM2 only

D. Group1, Managed1, VM1, and App1 only

Correct Answer: A

Security principal

A security principal is an object that represents a user, group, service principal, or managed identity that is requesting access to Azure resources. You can assign a role to any of these security principals.

* Managed1 – OK

The scope for managed identities is at the Subscription level.

* App1 – OK

What can I do with Azure RBAC?

Here are some examples of what you can do with Azure RBAC:

Allow an application to access all resources in a resource group

Etc.

* Group1 – Not OK

Not a dynamic device group.

Dynamic group membership adds and removes group members automatically using membership rules based on member attributes.

VM1, VM2 – Not OK Not a virtual machine.

Reference: https://learn.microsoft.com/en-us/azure/role-based-access-control/overview

Question 8:

You have an Azure subscription.

You create an Azure web app named Contoso1812 that uses an S1 App service plan.

You create a DNS record for www.contoso.com that points to the IP address of Contoso1812.

You need to ensure that users can access Contoso1812 by using the https://www.contoso.com URL.

Which two actions should you perform? Each correct answer presents part of the solution.

NOTE: Each correct selection is worth one point.

A. Turn on the system-assigned managed identity for Contoso1812.

B. Add a hostname to Contoso1812.

C. Scale out the App Service plan of Contoso1812.

D. Add a deployment slot to Contoso1812.

E. Scale up the App Service plan of Contoso1812.

F. Upload a PFX file to Contoso1812.

Correct Answer: BF

B: You can configure Azure DNS to host a custom domain for your web apps. For example, you can create an Azure web app and have your users access it using either www.contoso.com or contoso.com as a fully qualified domain name

(FQDN).

To do this, you have to create three records:

A root “A” record pointing to contoso.com

A root “TXT” record for verification

A “CNAME” record for the www name that points to the A record

E: To map a custom DNS name to a web app, the web app\’s App Service plan must be a paid tier (Shared, Basic, Standard, Premium, or Consumption for Azure Functions). I

Scale up the App Service plan: Select any of the non-free tiers (D1, B1, B2, B3, or any tier in the Production category).

References:

https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom-domain

Question 9:

HOTSPOT

You have an Azure subscription.

You need to create and deploy an Azure policy that meets the following requirements:

1. When a new virtual machine is deployed, automatically install a custom security extension.

2. Trigger an autogenerated remediation task for non-compliant virtual machines to install the extension.

What should you include in the policy? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Hot Area:

AZ-500 exam questions 9

Correct Answer:

AZ-500 exam questions 9-2

Reference: https://docs.microsoft.com/en-us/azure/governance/policy/how-to/remediate-resources

Question 10:

You need to ensure that User2 can implement PIM. What should you do first?

A. Assign User2 the Global administrator role.

B. Configure authentication methods for contoso.com.

C. Configure the identity secure score for contoso.com.

D. Enable multi-factor authentication (MFA) for User2.

Correct Answer: A

To start using PIM in your directory, you must first enable PIM.

1. Sign in to the Azure portal as a Global Administrator of your directory.

You must be a Global Administrator with an organizational account (for example, @yourdomain.com), not a Microsoft account (for example, @outlook.com), to enable PIM for a directory.

Scenario: Technical requirements include: Enabling Azure AD Privileged Identity Management (PIM) for contoso.com

References:

https://docs.microsoft.com/bs-latn-ba/azure/active-directory/privileged-identity-management/pim-getting-started

Question 11:

DRAG DROP

You have an Azure subscription named Sub1 that contains an Azure Log Analytics workspace named LAW1.

You have 500 Azure virtual machines that run Windows Server 2016 and are enrolled in LAW1.

You plan to add the System Update Assessment solution to LAW1.

You need to ensure that System Update Assessment-related logs are uploaded to LAW1 from 100 of the virtual machines only.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Select and Place:

AZ-500 exam questions 11

Correct Answer:

AZ-500 exam questions 11-2

References: https://docs.microsoft.com/en-us/azure/azure-monitor/insights/solution-targeting

Question 12:

Note: The question is included in several questions that depict the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.

Your company has an Azure subscription linked to their Azure Active Directory (Azure AD) tenant.

As a Global administrator for the tenant, part of your responsibilities involves managing Azure Security Center settings.

You are currently preparing to create a custom sensitivity label.

Solution: You start by creating a custom sensitive information type.

Does the solution meet the goal?

A. Yes

B. No

Correct Answer: A

The scenario involves creating a custom sensitivity label, and the solution proposed starts by creating a custom sensitive information type. If we reassess the context under the premise that the correct answer is indeed A, suggesting that the solution meets the goal, it’s important to clarify the relationship between sensitivity labels and sensitive information types within Microsoft’s ecosystem.

Sensitivity labels in Microsoft 365 (which includes Azure Information Protection) are used to classify and protect documents and emails based on their sensitivity. These labels can enforce protections such as encryption, content marking, and access restrictions.

Sensitive information types, on the other hand, are predefined or custom definitions used to identify and locate sensitive items across your organization’s data, such as social security numbers, credit card numbers, or custom patterns unique to your organization. These definitions can be used as part of the criteria for applying sensitivity labels automatically.

Given this understanding, the process of creating a custom sensitivity label could indeed involve starting with the creation of a custom sensitive information type. This is because custom sensitive information types can be utilized in policies for the automatic application of sensitivity labels based on content detection. If the goal is to ensure that sensitivity labels are applied accurately and automatically to content containing specific types of sensitive information, then creating a custom sensitive information type that defines the criteria for this sensitive information is a logical first step. This custom type can then be used in the conditions for automatically applying the custom sensitivity label.

Therefore, under the clarification that creating a custom sensitivity label may involve defining the types of sensitive information that trigger the application of these labels, starting by creating a custom sensitive information type would be a valid approach to achieving the goal. This explanation aligns with the corrected answer being:

A. Yes

Reference: https://docs.microsoft.com/en-us/office365/securitycompliance/customize-a-built-in-sensitive-information-type

Question 13:

HOTSPOT

You are evaluating the security of VM1, VM2, and VM3 in Sub2.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point.

Hot Area:

AZ-500 exam questions 13

Correct Answer:

AZ-500 exam questions 13-2

Question 14:

You have an Azure subscription that contains a resource group named RG1 and a security group named ServerAdmins. RG1 contains 10 virtual machines, a virtual network named VNET1, and a network security group (NSG) named NSG1. ServerAdmins can access the virtual machines by using RDP.

You need to ensure that NSG1 only allows RDP connections to the virtual machines for a maximum of 60 minutes when a member of ServerAdmins requests access. What should you configure?

A. an Azure policy assigned to RG1

B. a just-in-time (JIT) VM access policy in Azure Security Center

C. an Azure Active Directory (Azure AD) Privileged Identity Management (PIM) role assignment

D. an Azure Bastion host on VNET1

Correct Answer: B

To ensure that NSG1 only allows RDP connections to the virtual machines for a maximum of 60 minutes when a member of ServerAdmins requests access, the correct solution is:

B. a just-in-time (JIT) VM access policy in Azure Security Center

Just-in-Time VM Access is a feature provided by Azure Security Center that helps to control access to virtual machines. It works by locking down the inbound traffic to the VMs by default and allowing access only when needed. When access is requested, Azure Security Center dynamically configures the NSGs to allow inbound traffic to the specific VM for a limited period, as specified in the JIT policy. This significantly reduces exposure to attacks while providing a flexible access control mechanism for administrators.

Here’s why the other options are not suitable for the described requirement:

A. An Azure policy assigned to RG1: Azure Policy helps in enforcing organizational standards and assessing compliance at scale. While it can enforce various configurations and standards, it does not dynamically manage access to VMs based on JIT requests.

C. An Azure Active Directory (Azure AD) Privileged Identity Management (PIM) role assignment: Azure AD PIM manages, controls, and monitors access within Azure AD, Azure, and other Microsoft services. It focuses on just-in-time privileged access management for roles, not for managing access to VMs or controlling NSG rules dynamically based on access requests.

D. An Azure Bastion host on VNET1: Azure Bastion provides secure and seamless RDP/SSH connectivity to your VMs directly in the Azure portal over SSL. While it enhances security by eliminating the need for public IP addresses on VMs, it does not inherently limit access to VMs based on time-bound requests like JIT VM access does.

Therefore, the JIT VM access policy in Azure Security Center (Option B) is the appropriate choice for this requirement, as it directly addresses the need to dynamically control RDP access to VMs within a specified time window.

Reference: https://docs.microsoft.com/en-us/azure/security-center/just-in-time-explained

Question 15:

Note: The question is included in several questions that depict the identical set-up. However, every question has a distinctive result. Establish if the solution satisfies the requirements.

Your company has an Active Directory forest with a single domain, named weylandindustries.com. They also have an Azure Active Directory (Azure AD) tenant with the same name.

You have been tasked with integrating Active Directory and the Azure AD tenant. You intend to deploy Azure AD Connect.

Your strategy for the integration must make sure that password policies and user logon limitations affect user accounts that are synced to the Azure AD tenant, and that the amount of necessary servers is reduced.

Solution: You recommend the use of federation with Active Directory Federation Services (AD FS).

Does the solution meet the goal?

A. Yes

B. No

Correct Answer: B

The solution involving the use of federation with Active Directory Federation Services (AD FS) does indeed provide a way to ensure that on-premises password policies and user logon restrictions are applied to user accounts that are synchronized to Azure Active Directory (Azure AD). AD FS allows for the use of on-premises Active Directory to authenticate users in Azure AD, which means that the authentication process, including enforcement of password policies and user logon restrictions, happens against the on-premises Active Directory.

However, the requirement also specifies that the solution should aim to reduce the amount of necessary servers. Deploying AD FS for federation typically involves setting up additional infrastructure, including AD FS servers and Web Application Proxy servers for extranet access. This could contradict the goal of minimizing the number of necessary servers.

Considering the goal of applying password policies and user logon restrictions while also reducing the server footprint, Azure AD Connect with Password Hash Synchronization (PHS) might be a more suitable solution. While PHS does synchronize password hashes from on-premises Active Directory to Azure AD, allowing users to use the same password for both on-premises and cloud services, it does not directly apply on-premises password policies or login restrictions to Azure AD. However, Azure AD has its own set of security and password policies that can be configured to meet organizational requirements.

Given the specific requirements and the trade-offs between federation and reducing the server footprint, recommending federation with AD FS may not fully meet the goal if minimizing infrastructure is a priority. Therefore, the correct answer, given the emphasis on reducing the number of necessary servers alongside applying password policies and user logon restrictions, would be:

B. No

Reference: https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-pta

More Microsoft exam questions. . .

Successfully pass the AZ-500 exam to obtain Microsoft Certified: Azure Security Engineer Associate certification. Additional preparation materials are required to prepare for the Microsoft Azure Security Technologies exam, which you can view here. With link.

Additional resources for the Microsoft Azure Security Technologies AZ-500 exam:

Document Format:


Book Format:


Video Format:

  1. Preparing for AZ-500 – Manage identity and access (1 of 4)
  2. Preparing for AZ-500 – Secure Networking (2 of 4)
  3. Preparing for AZ-500 – Secure compute, storage, and databases (3 of 4)
  4. Preparing for AZ-500 – Manage security operations (4 of 4)

New changes to the new AZ-500 exam

There has been a change in the AZ-500 exam, and if you want to pass the exam, you must be the first to know.

It is mainly reflected in two major parts:

  1. The Microsoft 365 Defender portal has been renamed to the Microsoft Defender portal. This change will appear on the exam in late April.
  2. The Microsoft AZ-500 exam was updated on January 31, 2024, and the main content changes are in the following diagram:
AZ-500 exam changes 1
AZ-500 exam changes 2

Your doubts: Microsoft AZ-500 exam

Where can I find the coupon code to get the AZ-500 dumps?

Here we provide you, latest Pass4itSure AZ-500 dumps discount code “save10

How to effectively prepare for the AZ-500 exam using only dumps?

No, you need other learning resources and a lot of practice.

What is the key to passing the AZ-500 exam?

Find the right way! such as using AZ-500 dumps and using other useful resources to help prepare for the exam.

Write at the end:

Downloading AZ-500 dumps and using the right exam preparation materials to pass the Microsoft Azure Security Technologies exam is the right choice.

The new AZ-500 dumps https://www.pass4itsure.com/az-500.html (PDF, VCE & Premium Program) can be downloaded here to easily prepare for the exam, advance your career, and showcase your expertise.