[2021.6] New Citrix 1Y0-241 practice test and pdf from Pass4itsure
The following is the new 2021 Citrix 1Y0-241 practice test, covering all exam answers and questions! You can test yourself! Please click on the full Citrix 1Y0-241 dumps https://www.pass4itsure.com/1y0-241.html (Q&As: 64)!
Welcome to download free Citrix 1Y0-241 dumps pdf: https://drive.google.com/file/d/1k3_G_yXhrwKthDm0xOnZiSj-Lqco_saw/view?usp=sharing
Citrix 1Y0-241 online practice testing questions and answers (q1-q13)
QUESTION 1
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck
at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
A. Purchase another Citrix ADC MPX appliance.
B. Plug another 10G Citrix ADC port into the router.
C. Add two more 10G Citrix ADC ports to the network and configure VLAN.
D. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).
Correct Answer: D
Reference: https://developer-docs.citrix.com/projects/netscaler-snmp-oid-reference/en/12.0/
QUESTION 2
Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding “\”identity\””
add rewrite policy POL_2 “HTTP.REQ.IS_VALID ” ACT_2
How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer
lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?
A. bind lb vServer lb_vsrv –policyName POL_1 –priority 110 –gotoPriorityExpression NEXT –type REQUEST bind lb
vServer lb_vsrv –policyName POL_2 –priority 100 –gotoPriorityExpression END –type REQUEST
B. bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression NEXT –type REQUEST bind lb
vServer lb_vsrv –policyName POL_2 –priority 100 –gotoPriorityExpression END –type REQUEST
C. bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression END –type
REQUEST
bind lb vServer lb_vsrv –policyName POL_2 –priority 80 –gotoPriorityExpression NEXT –type
REQUEST
D. bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –type REQUEST bind lb vServer lb_vsrv –policyName
POL_2 –priority 100 –type REQUEST
Correct Answer: A
QUESTION 3
Scenario: A Citrix ADC receives packets destined for a MAC address owned by the Citrix ADC. The destination IP
address of the packets does NOT belong to the Citrix ADC. Layer 3 mode is enabled by default on the Citrix ADC.
The Citrix ADC will __________ the packets in this scenario. (Choose the correct option to complete the sentence.)
A. route
B. process
C. bridge
D. drop
Correct Answer: A
Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/configuresystemsettings/configure-modes-packet-forwarding.html
QUESTION 4
A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?
What could be causing this?
A. Log facility is NOT configured.
B. TCP logging is NOT enabled.
C. User-defined audit log is NOT configured.
D. Log level is NOT enabled.
Correct Answer: D
QUESTION 5
What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure
traffic?
A. A private key
B. A certificate revocation list (CRL)
C. A certificate signing request (CSR)
D. A certificate key-pair
Correct Answer: A
Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/how-to-articles/create-and-use-sslcertificates-on-acitrix-adc-appliance.html
QUESTION 6
Scenario: A Citrix Administrator gives permissions to team members to access their own admin partition. This will allow
them to add resources for different departments and manage them without making changes to the default Citrix ADC
partition and configuration.
One team member typing to use the command line interface (CLI) to troubleshoot an authentication issue could NOT
use aaad.debug. However, the team member has full permissions on the admin partition.
What can be the cause of this issue?
A. The team member is NOT using the CLI correctly.
B. The team member needs to troubleshoot the issue from the GUI.
C. The team member does NOT have permission to use the CLI.
D. The team member does NOT have shell access by design.
Correct Answer: A
QUESTION 7
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different
subnet.
What does the administrator need to do for HA to work in different subnets?
A. Configure SyncVlan
B. Turn on fail-safe mode.
C. Turn on HA monitoring on all interfaces
D. Turn on Independent Network Configuration (INC) mode.
Correct Answer: D
Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/system/high-availability-introduction/configuring-highavailability-nodes-different-subnets.html
QUESTION 8
A Citrix Administrator needs to match the host name `www.example.com\\’ in all HTTP requests.
Which expression, when used, meets this requirement?
A. HTTP.REQ.HOSTNAME.EQ(“www.example.com”)
B. HTTP.RES.HOSTNAME.EQ(“www.example.com”)
C. HTTP.REQ.HOSTNAME(“example.com”)
D. HTTP.RES.HOSTNAME.CONTAINS(“www.example.com”)
Correct Answer: D
QUESTION 9
What is the effect of the “set cs vServer-CS-1 ?edirectURL http://www.newdomain.com/mysite/” command?
A. If the vServer-CS-1 encounters a high connection rate, then users will be redirected to http://
www.newdomain.com/mysite/.
B. If the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain .com/mysite/.
C. All the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.
D. All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.
Correct Answer: B
QUESTION 10
Scenario: A Citrix Administrator executed the command below in an active-active, global server load balancing (GSLB)
setup.
set gslb parameter –ldnsprobeOrder DNS PING TCP
The order to calculate the _____ for dynamic proximity will be the DNS UDP query followed by the ping and then TCP.
(Choose the correct option to complete the sentence.)
A. Time to live (TTL)
B. Empty Domain Service (EDS)
C. Multiple IP responses (MIR)
D. Round-trip time (RTT)
Correct Answer: D
QUESTION 11
Scenario: Client connections to certain vServers are abnormally high. A Citrix Administrator needs to be alerted
whenever the connections pass a certain threshold.
How can the administrator use Citrix Application Delivery Management (ADM) to accomplish this?
A. Configure network reporting on the Citrix ADM by setting the threshold and email address.
B. Configure SMTP reporting on the Citrix ADM by adding the threshold and email address.
C. Configure TCP Insight on the Citrix ADM.
D. Configure specific alerts for vServers using Citrix ADM.
Correct Answer: A
QUESTION 12
Scenario: Users are trying to access https://cs.mycompany.com, but are receiving the error below:
HTTP 503 Service Unavailable
What can a Citrix Administrator change in the Citrix ADC configuration to fix this?
A. Enable the content switching feature.
B. Disable the spillover redirect URL.
C. Bind a certificate.
D. Bind the default load-balancing vServer.
Correct Answer: D
Reference: https://support.citrix.com/article/CTX120240
QUESTION 13
Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new
ones. The changes caused an outage that needs to be resolved as quickly as possible. There is no Citrix ADC backup.
What does the administrator need to do to recover the configuration quickly?
A. Restart the Citrix ADC.
B. Restore from the revision history.
C. Run saved versus running configuration.
D. Run highly availability (HA) file synchronization.
Correct Answer: B
The latest Citrix 1Y0-241 pdf by Google Drive
[latest pdf] Citrix 1Y0-241 pdf https://drive.google.com/file/d/1k3_G_yXhrwKthDm0xOnZiSj-Lqco_saw/view?usp=sharing
Share the Pass4itsure Citrix exam dumps discount code 2021 for free
Pass4itsure Citrix exam dumps discount code “Citrix”.
Summary:
With your hard work and Pass4itsure’s 1Y0-241 dumps pdf updated and 1Y0-241 practice test, your success is at the doorstep.
Latest update Citrix 1Y0-241 dumps from Pass4itsure: https://www.pass4itsure.com/1y0-241.html
Free Citrix 1Y0-241 dumps pdf download from Google Drive: https://drive.google.com/file/d/1k3_G_yXhrwKthDm0xOnZiSj-Lqco_saw/view?usp=sharing